Cool Automation CoolMaster 3000T Instrukcja Użytkownika Strona 17
- Strona / 19
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Firmware Update
CoolMaster PRM
17
www.xdimax.com
© 2009 XDIMAX LTD
Rev 3.0
4 Firmware Update
4.1 Entering bootloader mode
The process of updating CoolMatser's firmware is very simple and straightforward. First of all
CoolMaster has be switched into bootloader mode. In order to do so, please connect your PC (Laptop)
to the RS232 port of the CoolMaster. Next open the Hyper Terminal program and run boot command.
This process is described in "User Manual" document. At this point "BOOT" message should appear
on the LCD screen of the CoolMaster. Now it is ready for firmware uploading. Please close Hyper
Terminal program and follow to the next step - Firmware Download.
If for some reason CoolMaster is not responding to boot command or preceding firmware update has
failed and CoolMaster is not functioning at all, follow the next steps in order to enter bootloader mode.
Step1
Disconnect power supply from the
CoolMaster
Step2
Open CoolMaster top cover
Step3
Open BOOT jumper shown on the
diagram
Step4
Connect power supply to CoolMaster
4.2 Firmware Download
Firmware update is supplied as a set of BAT file(s) and firmware image(s). BAT file can be for
example progp-DAIKIN.bat and corresponding image file DAIKIN.INC. Make sure that BAT file and the
image file are located in same directory. In order to start the process, please simply run the BAT file.
After running BAT file, the ComPort selection prompt will appear and the correct port number should be
entered in order to proceed.
- CoolMaster 1
- 1 RS232 Interface 3
- 1.2 Port Settings 4
- 2.1 Message format 5
- 2.2 Indoor Unit Addressing 5
- CoolMaster PRM 6
- 3 Commands Reference 7
- 3.1.3 boot 8
- 3.1.4 cool 8
- 3.1.5 dry 8
- 3.1.6 heat 9
- 3.1.7 fan 9
- 3.1.8 filt 10
- 3.1.9 fspeed 10
- 3.1.10 off 10
- 3.1.11 on 11
- 3.1.12 set 11
- 3.1.13 simul 12
- 3.1.14 stat 13
- 3.1.15 stat2 13
- 3.1.16 stat3 14
- 3.1.17 swing 15
- 3.1.18 temp 16
- 4 Firmware Update 17
- 4.3 Reboot 18
- © 2009 XDIMAX LTD 19
Powiązane produkty i podręczniki dla Nie Cool Automation CoolMaster 3000T
Nie Cool Automation 7000F Dokumentacja
(28 strony)
(28 strony)
Nie Cool Automation 9000H Przewodnik Instalacji
(30 strony)
(30 strony)
Nie Cool Automation 7000F Instrukcja Użytkownika
(28 strony)
(28 strony)
NAD Electronics Classic 512 manuales
Manuales del propietario y guías del usuario para No NAD Electronics Classic 512.
Ofrecemos 1 manuales en pdf NAD Electronics Classic 512 para descargar gratis por tipos de documentos: Manual de usuario
Komentarze do niniejszej Instrukcji